1674229 – Tolerance Days for MRP

Tolerance days for MRP SAP B1

Tóm tắt nội dung SAP Note 1674229 – “Tolerance Days” (số ngày dung sai) được tính toán trong chức năng MRP của hệ thống SAP Business One:

1. Định nghĩa & Mục đích

  • Mục đích: Giảm thiểu chi phí mua hàng và chi phí sản xuất bằng cách cho phép trì hoãn việc tạo các khuyến nghị đặt hàng (MRP recommendations) nếu nhu cầu đó có thể được đáp ứng muộn hơn trong một khoảng thời gian cho phép.

  • Khái niệm: Tolerance Days (số ngày dung sai) là khoảng thời gian kéo dài (prolonging period) mà hệ thống được phép lùi lịch đáp ứng nhu cầu.

  • Phạm vi áp dụng: Chỉ áp dụng cho mặt hàng mua ngoài (Purchase Items).

  • Thiết lập: Cấu hình tại trường Tolerance Days trên Tab Planning của Item Master Data, hiển thị trong thiết lập Nhóm mặt hàng (Item Groups – Setup) và có thể thay đổi trực tiếp tại cửa sổ MRP Wizard.

2. Nguyên tắc hoạt động của Thuật toán MRP

Sau khi tính toán nhu cầu, hệ thống sẽ nhìn trước (look forward) một khoảng thời gian bằng số ngày dung sai để xác định số tồn kho cuối kỳ tối đa (MAXINVTOL).

Quyết định khuyến nghị đặt hàng sẽ dựa vào giá trị MAXINVTOL này:

  • Trường hợp 1 (MAXINVTOL > 0): Tồn kho trong tương lai đủ đáp ứng. SAP B1 sẽ không tạo khuyến nghị đặt hàng cho kỳ hiện tại.

  • Trường hợp 2 (MAXINVTOL < 0 nhưng lớn hơn tồn kho cuối kỳ hiện tại): Nhu cầu tương lai chỉ được đáp ứng một phần >>> Tạo khuyến nghị đặt hàng một phần.

  • Trường hợp 3 (MAXINVTOL <= tồn kho cuối kỳ hiện tại): Tồn kho tương lai không cải thiện được gì >>> Tạo khuyến nghị đặt hàng toàn bộ số lượng thiếu hụt (giống như khi ngày dung sai bằng 0).

3. Các quy tắc đặc biệt khác

  • Yêu cầu chuyển kho (Inventory Transfer Requests): Chỉ được tạo vào cuối khoảng thời gian ngày dung sai được sử dụng thực tế (vì nhu cầu có thể được đáp ứng bất kỳ lúc nào trong khoảng thời gian dung sai đó).

  • Chu kỳ đặt hàng (Order Intervals): Không làm thay đổi cách tính số lượng khuyến nghị của từng kỳ MRP, nhưng có thể gom các số lượng khuyến nghị nhỏ hơn lại với nhau do tác động của ngày dung sai.

  • Ngày lễ (Holidays): Ngày dung sai có tính đến lịch ngày lễ nếu tùy chọn tính ngày lễ được bật trong MRP.

  • Hiển thị cảnh báo (Recommendation in Red): Nếu việc chậm trễ do ngày dung sai dẫn đến tồn kho bị âm, dòng khuyến nghị sẽ hiển thị màu đỏ và trường Exception (Ngoại lệ) sẽ hiện giá trị “Tolerance Days”.

  • Cộng dồn trong BOM: Nếu thiết lập ngày dung sai cho nhiều cấp trong Bill of Materials (BOM), số ngày dung sai sẽ cộng dồn tích lũy theo từng cấp (Ví dụ: Thành phẩm hoãn sản xuất chờ nguyên liệu thì ngày dung sai tổng thể sẽ kéo dài ra).


Symptom

A functionality allowing tolerance days in MRP is needed to customize the MRP scenario.

Solution

Tolerance Days Functionality

To minimize purchasing and production costs in relevant environments, users will now have the ability to specify the new Tolerance Days field on the Planning tab of the item card.
When specified in the item card, the Item Tolerance Days field is displayed in the MRP wizard in the Item Groups – Setup window. It is also displayed in the MRP Tolerance Days field where the value can be changed.
With the tolerance days functionality, the system will allow the recommendations from MRP to fulfill the requirements at a later day. The prolonging period is defined as Tolerance Days.

The tolerance days functionality is used for purchase items only. After the MRP algorithm has calculated if there is a need to reschedule a recommendation for either purchase or production order (see the comment about recommendations for inventory transfer requests below) for a specific MRP period – then before scheduling that recommendation it proceeds as follows:

  • Looks forward by the number of tolerance days beyond the current MRP period and identifies the maximum final inventory position of any MRP period within the tolerance day period.
  • If the maximum final inventory quantity of any MRP period within the tolerance day period (hereafter MAXINVTOL) is greater than or equal to zero, then no purchase or production order recommendation will be created for the current MRP period being calculated.
  • If the MAXINVTOL is negative but greater than the final inventory position of the MRP period currently being calculated, then a partial order recommendation will be made and set to the value of ‘zero minus MAXINVTOL’.
  • If the MAXINVTOL is negative but less than or equal to the final inventory position of the MRP period currently being calculated, then the full order recommendation will be made just as if the tolerance day period was set to zero.

Example 1

Buy Item, Today is 1 May, Planning Horizon: 1 May – 20 May, Lead Time: 5 Days, Demand for 100 on 11 May, Receipt of 100 on 12h May, Tolerance Days: 3 Days

In this example, the demand on 11 May will generate an order recommendation on 6 May to be received on 11 May showing a negative inventory level of -100. The item code will therefore be displayed in red; there is no need for a separate warning message.
If no order recommendations is made on 11 May, the final inventory at the end of 12 May will be zero and no order recommendation will be made.

 

Example 2

Buy Item,  Today is 1 May, Planning Horizon: 1 May – 20 May, Lead Time: 5 Days, Demand for 100 on 11 May, Receipt of 80 on 12h May, Tolerance Days: 3 Days

In this example, the demand for 100 on 11 May will generate an order recommendation on 6 May to be received on 11 May. However, since the partial quantity of 80 is expected to be received within the tolerance day period, the order recommendation will only be for the shortfall of 100 minus 80 = 20 items.
If no order recommendation is made on 11 May, then the final inventory at the end of 12 May will be -20 and therefore the recommendation for a quantity of 20 will be made.

Inventory Transfer Requests

Inventory transfer requests will only be made at the end of the tolerance day period which is currently used (as sometimes demand will be satisfied within the tolerance day period, for example, on day 3 out of a 5 day tolerance period – in which case it will be possible to have the inventory transfer request on day 4 of the tolerance day period).

Order Intervals

The order interval groups recommendations at he beginning of the order interval period. It should not affect the calculation of the recommended quantity in any individual MRP period and therefore its behavior is unaffected by additional tolerance days. It will only be affected in that it may group smaller recommendation quantities because of the impact of the tolerance days.

Holidays

Tolerance days take holidays into account if holidays are included in the MRP calculation.

Inventory Level

The system looks ahead by the tolerance days to identify the inventory level. If the MAXINVTOL is greater than the final inventory of the current MRP period, it contributes the value of Max (Inventory Level minus MAXINVTOL, 0) to the order recommendation quantity. The same rule applies to the future data period. No special rules apply to parent items with a BOM.

Recommendation in Red

Any time there is a red recommendation as a result of tolerance days delay, the Exception field in the Recommendation window displays the value “Tolerance Days”.

Tolerance Days for Multiple Items in BOM Tree

If users choose to set tolerance days to multiple items in a BOM tree, the effect of the tolerance days accumulates for each additional level in the BOM tree.

Example

P1 is a production item with tolerance days of 3 and a lead time of 0.
C2 is a purchase item and is the single component of P1 with tolerance days of 2 and a lead time of 0.

If a production order for P1 already exists 3 days after the demand date and a purchase order for C2 already exists 5 days after the demand date, then the tolerance days for P1 is 5 days as it will not be produced until the 5th day after the demand date.

Picture of Trần Văn Sơn

Trần Văn Sơn

Với 18+ năm kinh nghiệm và 50+ dự án thành công, tôi chuyên giải quyết bài toán quản trị từ gốc rễ quy trình và con người. Phương châm của tôi là hướng doanh nghiệp vận hành theo chuẩn SAP B1 toàn cầu, đảm bảo hệ thống vận hành đơn giản, hiệu quả ở hiện tại và dễ dàng nâng cấp, mở rộng trong tương lai.
Thảo luận và chia sẻ kinh nghiệm
Bạn có gặp tình huống tương tự khi sử dụng hệ thống SAP Business One?

Bài có liên quan theo chủ đề đang xem

3777838 – Enhanced “E-Mail” type activities

Symptom Here are the updates to the E-Mail type activities: New Send As options in E-Mail type activities and Send Message window New sending option of Microsoft Outlook New Activity of “Email” Type option in Sent Emails Report – Selection Criteria window Enhanced Emailed checkbox

Xem tiếp »
Scroll to Top